Morion

The Morion helmet sits comfortably on your head as you march, faithful to its master despite the challenges. It has been a long and dusty road, but that helmet has remained with you through it all.

As your infantry unit comes to a halt, there is the tension one always feels before the fight. You resist the anxiety, because the moment you step into battle all of that must fade away. It will be you fighting alongside your fellow soldiers, and it will be your trustworthy armour that keeps you alive.

DETAILS

Epic Armoury’s Morion is a steel helmet inspired by the 15th- to 16th-century Spanish conquistadors conquering the world for Gold, God and Glory. The Morion’s brim is shaped to protect the head and face without obstructing vision, curved along the front and back. The skull-cap is reinforced with a long comb running from the forehead along the helmet’s apex. Riveted cheek guards are fitted to the helmet, adding additional protection to the face.

Secure the Morion by tightening the leather strap beneath the chin, keeping the helmet in place. Made of 1 mm thick mild steel and top-grain leather straps and fittings, this armour piece is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care.

Available in sizes Medium and Large.

HISTORY

• Used from the middle 16th to early 17th centuries
• Crest, or “comb,” along the top was designed to strengthen the helmet
• Later versions added the cheek guards to protect soldiers from sword cuts
• Evolved from the kettle hat

• Made from 1mm/19 gauge thick mild steel
• Rolled edges with no sharp edges
• Straps and fittings made from top-grain leather
• Hand made, welded pieces for maximum durability
• Polished steel finish

Epic Armoury metal works products should still be treated with oil and kept in dry storage. All our metal armours contain leather parts that need regular maintenance using leather-care products to keep the leather from drying out.

Cleaning

If your armour does get wet, it is important that you dry it thoroughly as soon as possible.

After handling, wearing, or after six months of storage or display, all metal should be wiped with a clean cloth. Lightly oil the clean surface with a quality machine or mineral oil. Alternatively, you can apply a coating of wax to the entire surface of exposed metal. Allow the wax to dry for a couple of hours and then buff it lightly with a soft cloth.

Rust-Prevention and Removal

Store your armour is a dry place and check it every couple of months for signs of rust. If any is found, remove it by gently rubbing the affected spot with a mildly abrasive pad dipped in paste wax, oil, or water-displacing liquid.

Leather Straps and Fittings

Clean by removing dirt with a hard brush, then gently rub on leather soap with a clean, damp cloth until the leather appears clean. Remove soap with a separate damp cloth to wipe away any soap residue and then use a dry cloth to wipe away any remaining water from the leather.

You should always condition leather after cleaning, since the soap will have removed some of its natural oils. Treat the leather with mink oil, olive oil, or beeswax polish with a clean cloth, gently rubbing a small amount of oil or polish in circles into the leather. Allow the leather to soak in the oil before wiping the leather with a final clean cloth to remove any excess residue.